Today, we are going to share instructions on how to build a nipple drinker for your pastured poultry. We use these primarily with our chickens, but it also works well for turkeys. Keep in mind, waterfowl need to dunk their bill into the water, so this doesn’t work for them. This project takes under 15 minutes, and is cheaper than the poultry fountain drinkers you can find in most farm stores, plus they are much easier to fill.
First off, let’s talk about what a poultry nipple is. We like these awesome side mounted drinkers from Lovatic. They don’t leak, work well even when it’s below freezing, and keep the water cleaner. They have a little metal center piece, a small lip on the bottom edge for the water to collect on, and they easily screw into the bucket. We have had these for a couple seasons, and they’ve outlasted one of the buckets. They can easily be removed and transferred to a new bucket should the bucket crack or otherwise be made unusable. The birds seem to figure them out pretty easily, but we show them how they are used several times over the course of a couple days just to be sure.
- Plastic bucket with lid
- Nipple drinkers
- 5/16 drill bit
- Optional: Pliers to help screw in the nipples
If you have any questions on how to build this drinker, let us know in the comments!